49
The spine should be in contact with the backrest during the entire exercise. The freely movable Lumbar
Cushion (optional) is individually adjusted according to the patient's size. Care should be taken during
exercise to ensure that the cervical spine remains in the neutral position and the head is not taken
forward. The training arm with the handles offers variable grip options. Thus, certain muscle parts can
be trained more intensively by means of exercise variations. The handles are grasped in a comfortable
position to the side of the torso and the lower load arms are pressed down. The desired weight can be
set from the device by means of a plug-in pin. The Range of Motion Limiter (optional) for the end
position is located above the weight block and is adjusted by loosening the fastening screw.
9.6
compass
®
530 Pulldown
Intended use
compass
®
530 Pulldown is designed for muscular stabilization of the scapula fixators.
Indications
•
Sarcopenia of the shoulder muscles
•
Osteoporosis in early stages (grade 0 and 1)
Specific patient positioning
The seat height can be individually adjusted according to the patient's size. The seat with the gas
pressure spring can be adjusted by actuating the release below the seat. The patient is positioned so
that he or she achieves approx. 90° flexion at the knee and hip joints and the feet are in contact with the
floor. This angle may differ for very small and very large persons.
