4-2
Chapter Four
REPLACING A BULB
1
Pull the lamp assembly out as shown in Figure 4-1.
2
Pull the bulb out. Insert a new bulb, being careful to avoid bending
the pins.
NOTE: Avoid touching the bulb with your fingers. Oils from your hands can
shorten the bulb life. Use a soft cloth to handle the bulb.
Figure 4-2 Removing a bulb
3
Replace the lamp assembly as shown in Figure 4-1.
CLEANING THE LENS
From time to time, you’ll need to clean the lens.
1
Take a piece of lens tissue and form it into a loose swab. Wet it with lens
cleaning fluid or denatured alcohol, and gently move it over the lens
surface.
2
Take a part of the lens tissue that you haven’t touched, and repeat the
process, going over the lens in another direction.
CAUTION! Your projector contains electric circuitry and sensitive optics.
Protect it from potential fluid spills.
