Setting Up the Lightbook Projector
1-11
NOTE:
Although both L-AUDIO-R and AUDIO IN may be connected at the
same time, only one can be active. If computer video is selected, AUDIO IN is
active. If NTSC/PAL/SECAM/S-Video is being viewed, the L-AUDIO-R ports are
active.
If your TV audio source outputs only monaural audio, your projector will
provide simulated stereo audio. Connect the audio source to the left AUDIO
port and set the stereo mode to mono using the Audio menu.
PROJECTOR AUDIO OUT
Your projector contains an internal stereo system consisting of an amplifier
and two speakers. Although this system provides high-quality stereo output,
a multimedia presentation may require independently powered speakers or
an external sound system.
NOTE: The projector’s internal speakers can be turned on or off using the
Audio menu (see page 2-21).
R
In–Audio–Out
Figure 1-15 The Audio Out port
To connect your projector to an external stereo system or powered speakers:
1
Insert one end of the Computer Audio cable into the projector’s
AUDIO OUT port.
2
Insert the other end into the external amplifier or powered speaker
system’s Audio In port.
3
If you are using two powered speakers, connect speaker A to speaker B
using the cables supplied with the powered speaker system.
NOTE: A mini-jack to RCA adapter is provided (see page i-2) in case your
external speaker system has RCA input plugs.
