2-6
Chapter Two
Lamp
The
key is used to turn the lamp on or off. Use this key when you want
to present information without displaying the computer or video image, or
to turn the lamp off to allow the projector to cool. When you turn the lamp
on, the fans will run at a higher speed.
NOTE: If the lamp is off, you can still use the VOLUME
and MUTE
keys to adjust the audio.
Arrows
The
keys allow you to:
• Make small adjustments in the position of the projected image. Press the
arrow keys to shift the image in the direction indicated by the arrow, or
• Modify settings in the Menus.
Menu
Menu
Press the
Menu
key to display the menus in the upper portion of the projected
image. Press the
Menu
key again to turn off the menus. Menu settings are
automatically stored when you exit the menus or turn off the projector.
Source
Source
The
Source
key allows you to switch between active connected sources.
Volume
The volume keys display a slide bar to adjust the volume of the projector
audio. Press the
key to increase or the
key to decrease the audio
output levels. These keys control both internal and external audio levels.