2-12
Chapter Two
OPERATING MODES
The Lightbook projector can operate in Local or Host mode.
Local Mode
Any time you activate the projector’s menus or the drawing tools, the
projector is in Local mode. In Local mode, the remote control can be used
for projector menu and draw functions only. It does not communicate with
the computer, even if it is attached through the SERIAL port.
In Local mode, the remote control can be used to:
• Select items in the projector menus.
• Control the drawing cursor.
Host Mode
If a data cable is connected between the projector's SERIAL port and the
computer, the projector can operate in Host mode. In Host mode, the
remote control can be used to control the Cyclops F/X software if it is
installed on your computer. Cyclops F/X can be used with both the Cyclops
Remote and Cyclops Quick Remote.
USING THE MENUS
Your Lightbook projector features a graphical user interface that makes it
easy to control all of the projector’s functions. Menu selections can be made
with the projector control panel or remote control. Menus will change based
on the type of video source you have connected.
1
Press MENU to display the on-screen menus.
2
Press the
▲
and
▼
keys or the edges of the remote control mouse disk to
select the desired menu item. An item is highlighted when it is selected.
3
Use the and keys or mouse disk to move across the menus.
4
Use the
▲
and
▼
keys or mouse disk to move down a menu column or to
change a menu value.
5
Press MENU again to close the menu. Settings are automatically saved
when you exit the menus.
NOTE: You must use the Cyclops Remote to open the menus and select items
in them. The Cyclops Quick Remote cannot access the menus.
