manualshive.com logo in svg

Proxim Tsunami MP-8100 Series, Reference Manual, Page: 77 / 99

Share
Download
Proxim Tsunami MP-8100 Series Reference Manual Download Page 77

Event Log Error Messages

Tsunami MP-8100 Reference Manual                                                                                                                                                                                  

77

ALERT

Unit Temperature -> ‘temp 
value in centigrade’ C, ‘temp 
value in farenheit’F lower 
threshold proximity reached

The device temperature is within 
5 degrees to the lower threshold 
value.

Move the device to a 
warmer environment.

EMERGENCY

Unit Temperature ->‘temp 
value in centigrade’ C, ‘temp 
value in farenheit ‘F breached 
threshold value.

The device breached the higher 
threshold value.

Move the device to a less 
challenging environment 
immediately.

ERROR

Temperature Statistics commit 
failed

Failed to save changes 
concerning temperature 
logging.

Reboot the device and try 
again to commit the 
changes.

Error Type

Message

Description

Corrective Action

Summary of Contents for Tsunami MP-8100 Series




































































































Reviews:

No comments