manualshive.com logo in svg

Proxim Tsunami MP-8100 Series, Reference Manual, Page: 44 / 99

Share
Download
Proxim Tsunami MP-8100 Series Reference Manual Download Page 44

Command Line Interface

Tsunami MP-8100 Reference Manual                                                                                                                                                                                        

44

Pir List Configuration

System Name(config-worpqos)# pir-list
System Name(config-worpqos-pirlist)# ?
Possible completions:
exit                        Exits Back to Global Configure Mode
rowadd                      Enter 0 to create a new table entry
rowedit                     Enter row number to edit/delete
System Name(config-worpqos-pirlist)# rowadd 0 ?
Possible completions:
 <[Enter]>                  Execute this command
rule-bit-mask               Enter the Rule Bit Mask Value
entry-status                Table Entry status
ether-priority-high         Ether Priority High Configuration
ether-priority-low          Ether Priority Low Configuration
ether-priority-ruleEnable/Disable Ethernet Priority
ether-type                  Ether Type Configuration
ether-type-ruleETHERNET     TYPE Rule Configuration
ether-value                 Ether Value Configuration
pir-name                    Rule Name Configuration
pppoe-encapsulation         PPPoE Encapsulation Configuration
pppoe-protocol-id           PPPoE Protocol ID Configuration
protocol-ids                Protocol Configuration
tos-high                    ToS High Configuration
tos-low                     ToS Low Configuration
tos-mask                    Tos Mask Configuration
tos-rule                    TOS Rule Configuration
vlan-id                     Vlan Id Configuration
vlan-rule                   VLAN Rule Configuration

System Name(config-worpqos-pirlist)# rowadd 0 entry-status 4
System Name(config-worpqos-pirlist)# rowadd 0 rule-bit-mask 2047
System Name(config-worpqos-pirlist)# rowadd 0 ether-priority-high 5
System Name(config-worpqos-pirlist)# rowadd 0 ether-priority-low 5
System Name(config-worpqos-pirlist)# rowadd 0 ether-priority-rule enable
System Name(config-worpqos-pirlist)# rowadd 0 ether-type dix-snap
System Name(config-worpqos-pirlist)# rowadd 0 ether-type-rule enable
System Name(config-worpqos-pirlist)# rowadd 0 ether-value 00:00
System Name(config-worpqos-pirlist)# rowadd 0 pir-name 802.1p
System Name(config-worpqos-pirlist)# rowadd 0 pppoe-encapsulation enable
System Name(config-worpqos-pirlist)# rowadd 0 pppoe-protocol-id 2:2
System Name(config-worpqos-pirlist)# rowadd 0 protocol-ids 0
System Name(config-worpqos-pirlist)# rowadd 0 tos-high 0
System Name(config-worpqos-pirlist)# rowadd 0 tos-low 0
System Name(config-worpqos-pirlist)# rowadd 0 tos-mask 0
System Name(config-worpqos-pirlist)# rowadd 0 tos-rule enable
System Name(config-worpqos-pirlist)# rowadd 0 vlan-id 1002
System Name(config-worpqos-pirlist)# rowadd 0 vlan-rule enable
System Name(config-worpqos-pirlist)# rowadd 0 entry-status 4
System Name(config-worpqos-pirlist)#exit
System Name(config-worpqos)#exit
System Name(config)#exit
System Name#
System Name# show worp-qos pir-list

INDEX 1

Rule Name                      : 802.1p
Bit Mask                       : 2047
ToS Rule                       : enable
ToS Low                        : 0
ToS High                       : 0
ToS Mask                       : 0
Ether Priority Rule            : enable
Ether Priority Low             : 5
Ether Priority High            : 5
VLan Rule                      : enable
Vlan Id                        : 1002
PPPoE Encapsulation Status     : enable
Ether Type Rule                : enable
Ether Type                     : dix-snap
PPPoE Protocol ID              : 2:2
Ether Value                    : 00:00
Protocol Ids                   : 0
Map Table Index Value          : 1
Entry Status                   : enable 

Summary of Contents for Tsunami MP-8100 Series




































































































Reviews:

No comments