manualshive.com logo in svg

Proxim Tsunami MP-8100 Series, Reference Manual, Page: 49 / 99

Share
Download
Proxim Tsunami MP-8100 Series Reference Manual Download Page 49

Command Line Interface

Tsunami MP-8100 Reference Manual                                                                                                                                                                                        

49

Pir Map List Configuration

System Name(config-worpqos)# pir-map-list
System Name(config-worpqos-pirmaplist)# rowedit 1 ?
Possible completions:
 <[Enter]>                Execute this command
 dst-ip-index-list           Specify destination ip index list with comma separator
 dst-mac-index-list         Specify destination mac index list with comma separator
 dst-port-index-list         Specify destination port index list with comma separator
 src-ip-index-list          Specify source ip index list with comma separator
 src-mac-index-list        Specify source mac index list with comma separator
 src-port-index-list        Specify source port index list with comma separator
System Name(config-worpqos-pirmaplist)# rowedit 1 dst-ip-index-list 0
System Name(config-worpqos-pirmaplist)# rowedit 1 dst-mac-index-list 0
System Name(config-worpqos-pirmaplist)# rowedit 1 dst-port-index-list 0
System Name(config-worpqos-pirmaplist)# rowedit 1 src-ip-index-list 0
System Name(config-worpqos-pirmaplist)# rowedit 1 src-mac-index-lis 0
System Name(config-worpqos-pirmaplist)# rowedit 1 src-port-index-list 0
System Name(config-worpqos-pirmaplist)#exit
System Name(config-worpqos)#exit
System Name(config)#exit
System Name# show worp-qos pir-map-list

// WORP QOS PIR MAP LIST CONFIGURATION//

INDEX 1
 Rule Name                            : Expedited Forwarding
 Source Mac Index List                : 0
 Destination Mac Index List           : 0
 Source Ip Address Index List         : 0
 Destination IP Address Index List    : 0
 Source Port Index List               : 0
 Destination Port Index List          : 0

INDEX 2
 Rule Name                            : Streaming Video
 Source Mac Index List                : 0
 Destination Mac Index List           : 0
 Source Ip Address Index List         : 0
 Destination IP Address Index List    : 0
 Source Port Index List               : 0
 Destination Port Index List          : 0

INDEX 3

 Rule Name                            : 802.1p BE
 Source Mac Index List                : 0
 Destination Mac Index List           : 0
 Source Ip Address Index List         : 0
 Destination IP Address Index List    : 0
 Source Port Index List               : 0
 Destination Port Index List          : 0

INDEX 4

 Rule Name                            : 802.1p Voice
 Source Mac Index List                : 0
 Destination Mac Index List           : 0
 Source Ip Address Index List         : 0
 Destination IP Address Index List    : 0
 Source Port Index List               : 0
 Destination Port Index List          : 0

INDEX 5

 Rule Name                            : 802.1p Video
 Source Mac Index List                : 0
 Destination Mac Index List           : 0
 Source Ip Address Index List         : 0
 Destination IP Address Index List    : 0
 Source Port Index List               : 0
 Destination Port Index List          : 0

Summary of Contents for Tsunami MP-8100 Series




































































































Reviews:

No comments