manualshive.com logo in svg

Proxim Tsunami MP-8100 Series, Reference Manual, Page: 39 / 99

Share
Download
Proxim Tsunami MP-8100 Series Reference Manual Download Page 39

Command Line Interface

Tsunami MP-8100 Reference Manual                                                                                                                                                                                        

39

Mac Acl Address Table 

1.5.4.9 VLAN 

VLANs can operate in different modes based on the incoming traffic. Enter the following commands to configure the VLAN 
parameters.

Vlan config table 

Enter the following commands to configure the VLAN configuration table.

Access Mode

Note: The following Commands are done For Ethernet Interface 1.

System Name(config)# macacl
System Name(config-macacl)# address-table
System Name(config-macacl-address)# rowadd 1 secondary-index 0 entry-status enable
System Name(config-macacl-address)# rowadd 1 secondary-index 0 comment firstrow
System Name(config-macacl-address)# rowadd 1 secondary-index 0 mac-address 
00:11:22:33:44:55
System Name(config-macacl-address)#exit
System Name(config-macacl)#exit
System Name(config)#exit
System Name# show macacl address-table

   // MAC ACL ADDRESS TABLE CONFIGURATION //
INDEX 1.1
 Mac Address     : 00:11:22:33:44:55
 Comment         : firstrow
 Entry Status    : enable

System Name(config)# vlan
System Name(config-vlan)# ? 
Possible completions: 
 config-table             Vlan Config Table Configuration 
 exit                     Exits Back to Global Configure Mode 
 mgmt-vlan-id             Management VLAN Identifier 
 mgmt-vlan-priority       Management VLAN priority 
 trunk-table              VLAN trunk parameters for ethernet interface 
 vlan-status              Configure the VLAN functionality 
System Name(config-vlan)# mgmt-vlan-id  234
System Name(config-vlan)# vlan-status enable
System Name(config-vlan)# mgmt-vlan-priority 0

Summary of Contents for Tsunami MP-8100 Series




































































































Reviews:

No comments