manualshive.com logo in svg

Proxim Tsunami MP-8100 Series, Reference Manual, Page: 7 / 99

Share
Download
Proxim Tsunami MP-8100 Series Reference Manual Download Page 7

Command Line Interface

Tsunami MP-8100 Reference Manual                                                                                                                                                                                        

7

1.2.3 Navigation and Special Keys

The CLI supports the following navigation and special key functions to move the cursor along the prompt line.

1.2.3.1 Key Combination Operation

1.2.4 Error Messages

The following table describes the error messages associated with improper inputs.

1.2.5 Help Message

When you type any command at the CLI and then press 

Enter

, it displays the help on the inputs that can be used with the 

command.

Key

Description

DEL, Backspace (BS)

Deletes previous character.

Ctrl-B

Moves back along the command line.

Ctrl-F

Moves forward along the command line.

Ctrl-A

Moves to the beginning of the command line.

Ctrl-E

Moves to the end of the command line.

Ctrl-C

Exits from one level.

TAB

Attempt command completion.

? 

Provides command listing.

#

Used at the beginning of lines for comments.

Error Message

Description

%Unknown command

A non-existent command has been entered at 
the command prompt.

%Invalid Input value detected

An invalid value has been entered at the 
command prompt.

Error in configuration parameters, 
Please Verify your Configuration

An Invalid configuration entered at the 
command prompt.

%Incomplete command

An incomplete command has been entered.

Summary of Contents for Tsunami MP-8100 Series




































































































Reviews:

No comments