manualshive.com logo in svg

Proxim Tsunami MP-8100 Series, Reference Manual, Page: 65 / 99

Share
Download
Proxim Tsunami MP-8100 Series Reference Manual Download Page 65

Command Line Interface

Tsunami MP-8100 Reference Manual                                                                                                                                                                                        

65

1.5.7.9 Display the WORP Statistics Information

1.5.7.10 Display the WORP SU Statistics Information

This is applicable only in BSU radio-mode.

System Name# show statistics worp-statistics
    // WORP STATISTICS //
 
INDEX 1 
 Average Local Signal           : 0 dBm
 Average Local Noise            : 0 dBm
 Remote Signal                  : 0 dBm
 Remote Noise                   : 0 dBm
 Remote Partners                : 0
 Base Station Announces         : 0
 Request For Services           : 0
 Registration Requests          : 0
 Registration Rejects           : 0
 Authentication Requests        : 0
 Authentication Confirms        : 0
 Registration Attempts          : 0
 Registration Incompletes       : 0
 Registration Timeouts          : 0
 Registration Last Reason       : 0
 Poll Data                      : 0
 Poll No Data                   : 0
 Reply Data                     : 0
 Reply More Data                : 0
 Reply No Data                  : 0
 Poll No Replies                : 0
 Send Success                   : 0
 Send Retries                   : 0
 Send Failure                   : 0
 Receive Success                : 0
 Receive Retries                : 0
 Receive Failure                : 0
Note:Below values will be displayed only in EndPointA radio-mode.
Provisioned UpLink CIR         : 0 Kbps
Provisioned DownLink CIR       : 0 Kbps
Provisioned UpLink MIR         : 0 Kbps
Provisioned DownLink MIR       : 0 Kbps
Active UpLink CIR              : 0 Kbps
Active DownLink CIR            : 0 Kbps
Active UpLink MIR              : 0 Kbps
Active DownLink MIR            : 0 Kbps
UpLink BandWidth               : 0 Kbps
DownLink BandWidth             : 0 Kbps

System Name# show statistics worp-endPointb
This command displays statistics for WORP EndPointB

Summary of Contents for Tsunami MP-8100 Series




































































































Reviews:

No comments