54
Note:
The Cordless Gateway must be connected to an Ethernet network
or to a device that provides high-speed Internet access (e.g., a
cable modem) during its boot-up cycle in order to obtain an IP
address from the ISP via DHCP or PPPoE. If you believe that the
Cordless Gateway should have received an IP address automati-
cally from the ISP but it did not, confirm that the Link LED is on
and try recycling power to the unit.
Refer to Chapter 7 for more information on these parameters.
Maestro Networking Features
The Symphony Maestro Configuration Tool allows you to configure and
monitor the following network functions:
Obtain Network Status Information
The Symphony Maestro Configuration Tool reports the number of packets
sent and received by the Symphony-HRF or Symphony adapter while
communicating with the cordless network. Click the <Status> button under
the Symphony Network Status heading to view the Cordless Status screen
shown in the following example.
