46
Note:
If your ISP uses Point to Point Protocol over Ethernet (PPPoE)
to provide you with Internet access, select the Use DHCP option
and click <Next> to continue. You may configure a PPPoE User
Name and Password from within the Symphony Maestro Con-
figuration Tool once the Composer steps are complete. See
Chapter 7 for details.
If you plan to use the Cordless Gateway in Transparent Bridging mode only
to communicate with a wired Ethernet network, leave these fields blank.
Refer to Chapter 7 for more information on these parameters.
Click <Next> once you have configured the TCP/IP parameters.
If you have previously configured the Cordless Gateway’s TCP/IP informa-
tion from another cordless computer, the Composer will give you the option
to change the existing settings, as shown below.
If you do not wish to change any TCP/IP information at this time, select the
No, don’t change the Cordless Gateway settings at this time option and
click <Next> to continue.
