manualshive.com logo in svg

Proxim Symphony-HRF, Manual

Share
Download
Proxim Symphony-HRF Manual Download Page 44

44

8.

The Symphony Composer should now be able to communicate with
the Cordless Gateway and should perform a link test.

8a.

Click <Next> to continue and proceed to Step 3: Configure TCP/IP
Information.

8b.

If problems persist, try moving the computer and Cordless Gateway
closer together; the computer may be out of range of the Cordless
Gateway.  Also, you may want to contact Symphony Technical
Support for assistance and additional suggestions.

Step 3: Configure TCP/IP Information

When configuring the first cordless computer on a network, the Cordless
Gateway will request IP addressing information from your ISP’s DHCP
(Dynamic Host Configuration Protocol) server.

If the Cordless Gateway cannot receive an IP address from the ISP’s DHCP
Server, the Composer will prompt you to enter any static TCP/IP information
assigned to you by the ISP (Internet Service Provider), as shown below.

Summary of Contents for Symphony-HRF




















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands