Chapter 3: Maintaining the Stratum
••••
66
Stratum Installation and Maintenance Guide
Changing the Communication Settings on the Console Port
Note that communication settings can only be changed when logged in through the console port and using the
VT-100 interface.
To change the communications settings for the console port, select
[System Admin..]
from the Main Menu, and
choose
[Console Port..].
-------------- VT-100 --------------
--------------------------- Console Port Configuration ------------------------
System Status: OPERATE - CONNECTED - OK [ Alarms & Events.. ]
-------------------------- Port Parameters -----------------------------------
Baud Rate: [9600 ]
Stop Bits: [1]
Parity: [None]
Handshake: [None ]
Data Bits: [8] Auto Logout (min): [30 ]
-----------------------------------------------------------------------------
[ ^Apply ] [ ^OK ] [ ^Cancel ]
------------------------------------------------------------------------------
Note that you cannot change the console port parameters from within the Web browser interface.
Set the communications parameters to new values and choose
[^Apply]
and
[^OK]
to save the settings and close
the window.
Summary of Contents for Stratum
Page 8: ......
Page 12: ... iv Stratum Installation and Maintenance Guide ...