manualshive.com logo in svg

Proware EP-2243D-F4S3, User Manual

Share
Download
Proware EP-2243D-F4S3 User Manual Download Page 20

 

Fibre to SAS/SATA II RAID Subsystem

 

 

20 

User Manual 

 

1.5.2   Hot-Swap Disk Drive Support 

 

The RAID subsystem has built-in protection circuit to support the replacement of 
SATA II hard disk drives without having to shut down or reboot the system. The 
removable hard drive tray can deliver “hot swappable” fault-tolerant RAID solution at a 
price much less than the cost of conventional SCSI hard disk RAID subsystems. This 
feature is provided in the RAID subsystem for advance fault tolerant RAID protection and 
“online” drive replacement. 
 

1.5.3   Hot-Swap Disk Rebuild 

 

The Hot-Swap feature can be used to rebuild Raid Sets with data redundancy such as 
RAID level 1, 0+1, 3, 5, 6, 30, 50 and 60. If a hot spare is not available, the failed 
disk drive must be replaced with a new disk drive so that the data on the failed drive 
can be rebuilt. If a hot spare is available, the rebuild starts automatically when a drive 
fails. The RAID subsystem automatically and transparently rebuilds failed drives in the 
background with user-definable rebuild rates. The RAID subsystem will automatically 
continue the rebuild process if the subsystem is shut down or powered off abnormally 
during a reconstruction process.  

 

 
 

 
 

 
 
 

 
 

 
 

 
 

 
 

 
 
 

 
 

 
 

 
 

 
 
 

 
 

Summary of Contents for EP-2243D-F4S3











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands