manualshive.com logo in svg

Proware EP-2243D-F4S3, User Manual

Share
Download
Proware EP-2243D-F4S3 User Manual Download Page 114

 

Fibre to SAS/SATA II RAID Subsystem

 

 

114 

User Manual 

 

Appendix 1   Volume Mapping in Dual Controller Mode 

 

 

 

 

In dual controller mode, the RAID subsystem has 2 Controllers, which work in 
Active/Standby-Standby/Active mode. 

In Active/Standby-Standby/Active mode, Volume Sets assigned even-numbered 
LUNs are active in Controller 1 and standby Controller 2, and Volume Sets assigned 
odd-numbered LUNs are standby in Controller 1 and active in Controller 2. 

 

NOTE: In Dual Controller mode, when using SATA disk drives (with 

dongle boards) it is recommended to create only a single Volume 
Set in a Raid Set (group of drives). For SAS disk drives, no 
problem to create several Volume Sets per Raid Set. 

 

 

 

 

 

NOTE: In Dual Controller mode, if Controller 1 fails, Controller 2 will take 

over. The fail over mode is called “Round Robin with Subset” 
(using MS Windows term). 

 

IMPORTANT: MPIO must be configured on the host system(s), in 
order for redundant LUNs (two paths via Controller 1 and 2) to 
appear as single LUNs.

 

 

Summary of Contents for EP-2243D-F4S3











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands