manualshive.com logo in svg

Proware EP-2243D-F4S3, User Manual

Share
Download
Proware EP-2243D-F4S3 User Manual Download Page 19

Fibre to SAS/SATA II RAID Subsystem

 

 

User Manual 

19 

 

 

 

1.4.2   Volume Set 

 

A Volume Set is seen by the host system as a single logical device. It is organized in a 
RAID  level  with  one  or  more  physical  disks.  RAID  level  refers  to  the  level  of  data 
performance and protection of a Volume Set.  A Volume Set capacity can consume all 
or a portion of the raw capacity available in a Raid Set. Multiple Volume Sets can 
exist on a group of disks in a Raid Set. Additional Volume Sets created in a specified 
Raid Set will reside on all the physical disks in the Raid Set. Thus each Volume Set on 
the Raid Set will have its data spread evenly across all the disks in the Raid Set. 
Volume Sets of different RAID levels may coexist on the same Raid Set. 
 
In the illustration below, Volume 1 can be assigned a RAID 5 level while Volume 0 might 
be assigned a RAID 0+1 level. 

 

 

 

1.5   High Availability 

 

1.5.1   Creating Hot Spares 

 

A hot spare drive is an unused online available drive, which is ready to replace a failed 
disk drive. In a RAID level 1, 0+1, 3, 5, 6, 30, 50, or 60 Raid Set, any unused online 
available drive installed but not belonging to a Raid Set can be defined as a hot spare 
drive. Hot spares permit you to replace failed drives without powering down the system. 
When the RAID subsystem detects a drive failure, the system will do automatic and 
transparent rebuild using the hot spare drives. The Raid Set will be reconfigured and 
rebuilt in the background while the RAID subsystem continues to handle system request. 
During the automatic rebuild process, system activity will continue as normal, however, 
the system performance and fault tolerance will be affected. 

 

 
IMPORTANT: The hot spare must have at least the same or more 
capacity as the drive it replaces. 

 

 
 
 

Summary of Contents for EP-2243D-F4S3











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands