manualshive.com logo in svg

Proware EP-2243D-F4S3, User Manual

Share
Download
Proware EP-2243D-F4S3 User Manual Download Page 131

Fibre to SAS/SATA II RAID Subsystem

 

 

User Manual 

131 

 

 

2.

 

When Disk Fails, How to Use Disk Power Function Command in Web GUI; 
With Hot Spare Configured 

 
 

NOTE: When a disk fails and the Volume Set use RAID Level with 
redundancy, such as RAID Level 5, the Volume Set state will 
become Degraded. If there is a Hot Spare configured, the Hot 
Spare will automatically rebuild the Raid Set / Volume Set. 

 

 

1.

 

Check which Disk has failed. In this example, 

Disk 

in 

Enclosure#1 Slot#1

 has 

failed. The disk failure event can also be verified in the System Event Information 
(event log) when you use “View Events/Mute Beeper” under System Controls. In 
this example, 

Disk 

in 

Enclosure#1 Slot#2

 is configured as 

Hot Spare

. 

 
 

NOTE: The Disk used in this example is from Enclosure#1 Slot#1. 
Make sure to verify which 

Enclosure#

 and 

Slot#

 the failed disk is 

located.

 

 
 

2.

 

The Volume Set will be rebuilt automatically using the Hot Spare (Disk in Slot#2). 
The System Event Information will show the “Rebuilding” event. 

 

 

 
 
 
 
 
 

Summary of Contents for EP-2243D-F4S3











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands