Steering-Speed based on Throttle position (SST)
[Advanced Level]
This function is available when the programming level is set to Advanced Level. SST
is similar to the 2-Step Steering Speed function, but the steering speed is
automatically adjusted based on the position of the throttle trigger. This function is
particularly useful when you want to a have sensitive steering at corners (low
trigger position) and a less sensitive steering on straightaway (high trigger position).
You can set the parameters to reduce the steering speed value at high-speed range
and increase the value at low-speed range, or vice versa as desired. To program;
1. Press button until the cursor is at SST.
2. Press button to display the SST screen.
3. Press / button until the desired value appears on Steering speed Low-side.
4. Press button to set or button to cancel and retain previous value.
5. Press and repeat steps 3 & 4 to set Trigger point and Steering speed High-side.
6. Pressing button returns to the Circuit menu.
Low
High
Steering
Speed
change point
100%
80%
70%
0
50
St speed L 80
Tg point 50
St speed H 70
[ SST ]
EPA
Response
Start / Idle up
DBA
Circuit mode
Servo speed
ABS
SST
Data Setting & Programming
30
NOTE
The 2-Step steering speed function is deactivated when SST is activated. When SST
is active, appears on the lower side of the normal LCD display.
SST
