Steering R00
Throttle F00
[ Trim ]
Directly Accessible Functions
Using the buttons on the control panel, the Digital Trim and the Dual Rate
functions can be adjusted quickly and easily. Make instant fine adjustments
without having to move around the LCD menu. The Stopwatch function is also
accessed directly. Activation buttons for the Start Rate and the Idle Up
functions are also available on the control panel.
Digital Trim
The digital trim button is located on the left side of the control panel. Steering and
Throttle trim adjustments can be made by pressing the trim button in one of the 4
available directions. Up and down are for Throttle trim and right and left are for
Steering trim. You will hear a beep with each increment of trim adjustment. The
amount of each increment is based on the Trim rate which is programmable in the
System mode. The trim positions are displayed both numerically and graphically on
the LCD.
NOTE
Throttle trim changes only the center (neutral) point and not the end points. This is
done to maintain your maximum speed and braking points.
Dual Rate
Dual rate adjusts the total steering servo throw simultaneously to the left and to
the right end points. Reducing the dual rate value makes the steering less
sensitive as the maximum amount of steering available is reduced. By pressing
the the or buttons on the control panel. dual rate values are quickly adjusted
with the result displayed on the LCD simultaneously. Note that the dual rate
works in conjuction with the EPA settings in Circuit Mode. Nay charges you make
to EPA settings will have an effect on dual rate values.
16
Data Setting & Programming
Throttle trim
Steering trim
Steering trim
Throttle trim
Rate
right turn 100%
left turn 100%
[ Dual rate ]
Dual Rate
