Proton 2 Channel FM Radio Control System, User Manual

Page: 18 / 39

Model name 1 : MODEL1
Frequency
Contrast
Trim rate
Data copy
System mode
1 to 2
12
10
Data Setting & Programming
Country : Germany
Shift : Positive
Frequency : 50 : 40.665 MHz
[ Frequency ]
Model name 1 : MODEL1
Frequency
Contrast
Trim rate
Data copy
System mode
1 to 2
12
10
Frequency & Shift Selection
The frequency feature allows selecting Countries, frequencies and shift types. There
are 2 kinds of shifts: Positive shift for
Futaba
TM
, KO
TM
, Hitec
TM
type of receivers and
negative shift for JR
TM
, Sanwa
TM
, Airtronics
TM
type of receivers. By selecting frequencies
and shifts accordingly, Husky can work with all popular FM receivers of others.
Note Band change is not possible in a given unit (for example: 27MHz to 75Mhz or 75MHz to
27MHz). To control a 27MHz FM receiver, you must purchase a 27MHz transmitter.
Frequencies can be changed, but only within a specific band.
1. Press button until the cursor is at Frequency.
2. Press button to display Frequency screen.
3. Press / button and or button to select the country. (For Euro model
only)
4. Press button until the cursor is at Shift.
5. Press button for "positive" and press button for "Negative"
(Press to confirm the new Shift or button to retain the previous Shift.)
6. Press button until the cursor is at Frequency.
7. Press or button until your desired frequency is displayed.
(Press button to confirm the new Frequency or button to retain previous
Frequency)
8. Press button returns to the System Mode menu.
System Mode Functions
As shown in the Programming Map on page 15, System mode provides the
programming for Model name entry, Frequency selection, LCD Contrast, Trim Rate,
and Data Copy. These basic settings apply to the transmitter system regardless of
the pit and circuit mode settings. The System Mode menu is accessible as follows:
1. Press button at normal display.
2. Press button twice until the cursor is at System Mode.
3. Press button to display the functions available under the System Mode.
Model Name Entry
For ease of identification, the model name function allows you to assign names up
to 8 characters in length for each of your models up to 10 models. Following the
memory location numbers, your model can also be identified by a number (0~9),
which is always displayed before the model name. To begin model name entry;
1. Press or button until desired letter appears. (A~Z, a~z, 1~0, space)
2. Press once to confirm the letter, and press or to select the next letter.
3. Press button once again to save the model name.
18