Chapter 3
antenna
function buttons
trim button
LCD
time lever
grip
trigger
battery box
steering wheel
control panel
body
Adaptation for Left-hander
Your Husky is factory assembled for right-handers. However the grip direction can
be changed for left-handers by following the directions below.
1. Make sure that the Power switch is set to OFF.
2. Carefully remove the 4 screws from the bottom section of the control panel.
3. Separate the control panel and the body by slowly pulling apart.
4. Rotate the head 180
o
degrees and carefully reinsert the control panel into the
body. Be carefully not to bend the pin connectors inside.
5. Reinstall the 4 screws. Be careful not to over-tighten the screws.
7
Preparation
Preparation & Getting Started
HUSKY 2 Channel FM TRANSMITTER
