Features
Chapter 2
Features
Synthesized PLL Channel Selection - Crystal-Free!
Frequencies of most transmitters and receivers are adjusted by replacing the
crystals. Enthusiasts who want to try on a different frequency channel must also
purchase the corresponding crystal sets. To complicate matters further there are so
many types of crystals based on modulation (FM/AM, PPM/PCM), conversion type
(Single/Dual) and Radio makers. To solve this complicated and costly way of
enjoying R/C, Proton Control Systems implemented the PLL (Phase-Locked Loop)
technology in developing the Husky transmitters and Ken receivers. Your preferred
frequencies is digitally tuned from the menu by simply by pressing buttons. In a
North American model, as an example, all 30 channels in the 75MHz band are
available at your fingertip.
Compatible with all popular FM transmitters & receivers
Your Husky transmitter and Ken receiver are each compatible with all popular FM
transmitters and receivers using the same frequency band. These include Positive
shift (
Futaba
TM
,
Hitec
TM
, or KO
TM
)
and Negative shifts (
JR
TM
, Sanwa
TM
or Airtronics
TM
).
USB port for PC game control (using optional cable)
Your Husky is more than a transmitter for your R/C models. Use your Husky
transmitter as a joystick (steering and throttle operations only) to control your PC
games.
Interchangeable grip direction for left or right handed drivers
Husky's symmetrical design allows you to change format from right- to left-hand
grip.
Comprehensive programming features
Husky provides 3 modes (System, Pit, and Circuit) of setup fields and 3 levels
(Basic, Intermediate, Advanced ) of programming to make its wide range of features
available for customisation. The programs are simple to set, but offer many
powerful and sophisticated functions.
Other features include :
- LCD menu-driven setup and programming with non-volatile memory saving
- Quick access Digital Trim & Dual Rate buttons with direct display
- 10 model memory with up to 8 characters of model name entry
- Direct Servo Control (using optional cable)
- Servo Reverse, Sub-Trim, Model select, Programming Level & Data Reset [Pit
Mode]
- End Point Adjustment (EPA), Response Sensitivity, Steering Speed, 2-Step
Steering Speed, Throttle Speed, 2-Step Throttle Speed, Start rate, Anti-lock
Braking System (ABS), 3-Programmed ABS (slow, medium, fast), Steering Speed
based on Throttle (SST), Dead Band Adjustments (DBA) and Idle Up features
[Circuit Mode]
- Trim Rate, Frequency & Shift, Contrast and Data copy functions [System Mode]
- Stopwatch with continuous lap timer function
- Audible and visual low battery alarm
- Charging jack receptacle (charger & rechargeable batteries not included)
6
