ProTec Polymer Processing GmbH
Foerdergeraet_FG201-FG206_BA_1v0_2018_en
65
8.5.1 Replacing compressed air cylinder 2
Replacing compressed air cylinder
Installing pin
1.
Unscrew compressed air nipple (5).
2.
Pull compressed air hose (4) from nipple (5).
3.
Loosen the nuts (6).
4.
Screw out the compressed air cylinder (57a).
5.
Remove valve holder (8).
6.
Hold the piston (9) of the compressed air cylinder tight.
7.
Screw off the pin (10) and the nut (11).
8.
Screw nuts (6, 11) and the pin (10) onto a new compressed air cylinder.
9.
Screw on the nut (11) up to the end of the threads.
10.
Apply Loctite 272 onto the threads of the pin (10) and screw on the pin up to the nut (11).
11.
Slide the valve holder (8) onto the cylinder flange.
12.
Screw in the compressed air cylinder (57a).
13.
The flange on the inside of the container must end flush with the sleeve.
The nipple (5) must point upwards.
14.
Align the valve holder (8) horizontal and lock with the nut (6).
15.
Stick the compressed air hose (4) in the nipple (5).