ProTec Polymer Processing FG 20 Series, Operating Manual, Page: 48 / 76

ProTec Polymer Processing GmbH Foerdergeraet_FG201-FG206_BA_1v0_2018_en
48
Additional work for devices with volume expansion
1. Open tensioning ring.
2. Remove volume expansion.
3. Clean:

Volume expansion

Conveyed goods container

Check valve or pipe elbow on suction nozzles

Discharge flap

Seal on discharge

Balance filter
4. Fasten volume expansion with the tensioning ring.
5. Place filter insert in the conveyed goods container or the volume expansion.
6. Fasten blower attachment.
7. Connect plug connectors.
8. Put on compressed air coupling.
9. Connect device to mains power.
10. Start conveying cycle.