ProStart CT-3400 TW, Installation Manual

Page: 10 / 32

P. 10
Installation Guide
CT-3400 TW
Brake Pedal is pressed again; therefore take your time to make the proper selection. To
return to the Programming Centre (Main Menu), press on the Brake Pedal.
1.
FLASH the Hood Pin Switch (see p. 8).
Before the 20 seconds have passed,
2. Press and hold the Brake Pedal, then press one of the following buttons on the
Transmitter:
•
LOCK
to enter Mode 1;
•
UNLOCK
to enter Mode 2;
•
TRUNK
to enter mode 3;
•
START/STOP
to enter mode 4.
The Parking Lights and the Siren will flash and chirp once or twice to confirm entry
into a Mode.
3. Release the Brake Pedal
.
Table 2
The Module can only be programmed Function by Function . After selecting a Mode (1
or 2), you will be taken to the first Function of that Mode. After entering an Option selection
for Function 1, you will be automatically taken to Function 2, and so on; therefore, be ready to
re-enter all option selections for all functions of the Mode you are accessing.
You may not
skip Functions*.
*NOTE:
Pressing the Brakes at any given moment will save the selection(s) you have entered
and will return you to the Programming Center.
For each Function, select one of the three Options by pressing the corresponding
button on the Transmitter:
•
LOCK
for Option 1,
•
UNLOCK
for Option 2,
•
TRUNK
for Option 3,
•
START/STOP
for Option 4,
•
F → LOCK
for Option 5.
Table 3
Note:
The unit will stay in programming mode until the hood pin-switch or the brake
pedal is pressed again.
Therefore, take your time to make the proper
selection. Pressing the brake pedal will bring you back to the programming
menu, where you can select another mode.
Each mode has functions for which options must be selected. Once you have selected Mode 1,
Mode 2, or Mode 3, the system automatically moves to function one. You must then select the
desired option for each function. Once you have selected an option, you will move to the next
function, and so on.
To select one of four options, press the appropriate button on the transmitter:
•
LOCK
button = Option 1
•
UNLOCK
button = Option 2
•
TRUNK
button = Option 3
•
START/STOP
button = Option 4
•
F
then
LOCK
button = Option 5
.
Table 4