Proroute H685, User Manual

Page: 100 / 109

E-mail: support@proroute.co.uk www.proroute.co.uk
-
HTTP access from WAN : allow or deny access router web management page from the
remote side.
-
Remote network : Any IP Address, Single IP address, Subnet.
-
IP address : fill a remote IP address that can access router web management page.
-
Netmask : 24 means net mask 255.255.255.0, 32 means 255.255.255.255, possible values
are from 1 to 32.
-
RFC1918 filter : reject requests from RFC1918 IPs to public server Ips.
3.6.9
Static Routes
-
Interface: You can choose the corresponding interface type.
-
Target: the destination host IP or network.
-
IPv4-Netmask : the destination IP mask.
-
IPv4-Gateway : IP address of the next hop.
-
Metric : used by router to make routing decisions.
-
MTU : maximum transmission unit
-
Table : the route table ID, the default value is 254, valid table ID 1-254.
Notice:
o
Gateway and LAN IP of this router must belong to the same network segment.
o
If the destination IP address is the one of a host, and then the Netmask must be
255.255.255.255.
o
If the destination IP address is IP network segment, it must match with the Netmask.
For example, if the destination IP is 10.0.0.0, and the Netmask is 255.0.0.0.