Proroute H685, User Manual

Page: 78 / 109

E-mail: support@proroute.co.uk www.proroute.co.uk
3.6.1 Operation Mode
Operation mode
Bridge:
All Ethernet and wireless interfaces are bridged into a single bridge interface.
Gateway: The first Ethernet port is treated as a WAN port. The second Ethernet port and the
wireless interface are bridged together and are treated as LAN ports.
AP Client: The wireless ap client interface is treated as a WAN port and the wireless AP interface
and the Ethernet ports are treated as LAN ports.
NAT Enabled
Network Address Translation. Default is Enabled.
Ethernet WAN port:
Wired-WAN port acts as WAN
Wired-WAN port acts as LAN
The default operation is in “Gateway mode”.
3.6.1.1 Set two LAN Ethernet Ports on H685
Check the " Wired-WAN port acts as LAN ". The router now has 2x LAN and no WAN port.
3.6.2 Mobile configuration
The router supports several cell modems. If you replace the original cell modem with a different one,
the router will automatically detect the new modem.
For more detail on this function and information of the APN, please go to
section 3.3.2 Setup
Wizard .