Page 1 of 14
09-13-568-Rev5
PR3207
Recovery Tracks Carrier
First Time Installation
•
Please read instructions carefully before installation.
•
Check the contents of kit. Contact your Prorack dealer if any parts appear to be missing or damaged.
•
Clean your roof racks and cargo basket prior to
fi
tting the Recovery Tracks Carrier.
Important Warning
•
It is critical that all Prorack racks and accessories be properly and securely attached to your vehicle. Improper
attachment could result in an automobile accident, and could cause serious bodily injury or death to you or to others.
•
You are responsible for securing the racks and accessories to your car, checking the attachments prior to use, and
periodically inspecting the products for adjustment, wear, and damage.
•
If you do not understand all of the instructions and cautions, or if you have no mechanical experience and are not
thoroughly familiar with the installation procedures, you should have the product installed by a professional installer
such as a roof rack specialist.
Tools Required (for mounting bracket, square bar and cargo basket installations only)
•
13 mm Spanner / 13 mm Socket Wrench
(for Square Bar and Cargo Basket installation only)
• Tape
Measure
Installation of Recovery Tracks Carrier plus Mounting Brackets on Prorack HD, Tradesman and other Heavy Duty Crossbars
Go to Page 3
Installation of Recovery Tracks Carrier plus Mounting Brackets on Prorack S-Wing and International T-Slot Crossbars
Go to Page 5
Installing Recovery Tracks Carrier direct to Prorack HD, Tradesman and other Heavy Duty Crossbars
Go to Page 7
Installing Recovery Tracks Carrier direct to Prorack S-Wing and International T-Slot Crossbars
Go to Page 9
Installing Recovery Tracks Carrier direct to P-bar and other square Crossbars
Go to Page 10
Installing Recovery Tracks Carrier on to a Cargo Basket
Go to Page 12
Note - this product is optimised to work with the following recovery tracks:
• Maxtrax
MkII
•
Tred 1100 mm & 800 mm
•
Torque Wrench (optional)
• Padlock
(optional)
Contents
