![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m200f/vtrak-m200f_quick-start-manual_1617265013.webp)
Step 6: Connect the Power
13
Figure 15.VTrak M300f/i and M200f/i front panel LED display
When boot-up is finished and the VTrak is functioning normally:
•
Controller LED blinks green once per second for five seconds, goes dark for
ten seconds, then blinks green once per second for five seconds again.
•
Power, FRU and Logical Drive LEDs display green continuously.
•
Fibre Channel/iSCSI/SCSI LEDs flash green if there is activity on that
channel.
There are two LEDs on each Drive Carrier. They report the presence of power
and a disk drive, and the current condition of the drive.
Figure 16.VTrak M500f/i/p disk carrier LEDs
Power
FC/iSCSI/SCSI-2 Activity
FRU Status
Logical Drive Status
FC/iSCSI/SCSI-1 Activity
Controller Heartbeat
Disk Status
Power/
Activity