![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m200f/vtrak-m200f_quick-start-manual_1617265005.webp)
Step 2: Mount VTrak in a Rack
5
Step 2: Mount VTrak in a Rack
The VTrak M-Class subsytems install directly to the rack with or without using the
supplied mounting rails. Refer to Chapter 2 of the
VTrak Product Manual
for
instructions on installing the rails and mounting your VTrak.
Step 3: Install Disk Drives
You can populate the VTrak with 1.5 GB or 3.0 GB SATA drives. Refer to Chapter
7 of the
VTrak Product Manual
for the number of drives needed for each RAID
configuration.
Install all of the drive carriers into the VTrak enclosure to ensure proper airflow,
even if you do not populate all the carriers with disk drives.
If you use different size disk drives in the same logical drive, the total size of the
logical drive will equal the size of the smallest disk drive times the number of
drives.
Refer to Chapter 2 of the
VTrak Product Manual
for diagrams showing how the
drive slots are numbered.
Figure 5. M500f/i drive carrier mounting holes
Caution
Use only the counter-sink screws supplied with the VTrak. Use of
other types of screws can damage the adjacent drives.
W
ARNING:
C
ount
er-sink scr
ews only
.
PATA-to-SATA
Adapter
SATA Drive Mounting Holes
PATA Drive
Mounting Holes