Fibre Channel directly attached to VTrak A-Class
D
IreCtly
COnneCt
tO
Vt
rak
a-C
lass
system
For each NAS Gateway device attached directly to the VTrak A-Class partner system:
1. Attach Fibre Channel cables to both Fibre Channel data ports on the rear panel of one NAS Gateway,
and connect the other end of one cable to the a Fibre Channel port on one controller of the partner VTrak
A-Class unit. Connect the remaining Fibre Channel cable to a Fibre Channel port on the other controller
of the VTrak A-Class.
2. Repeat the procedure described in step 1 for the other NAS Gateway.
3. When completed, each NAS Gateway will be connected to both controllers on the VTrak A-Class as in the
illustration below.
26
VTrak G-Class Product Manual
Promise Technology