Promise Technology Vess J3600 Product Manual Download Page 155

Page: 155 / 337

sIng

tHe

Vent

Iewer

The Event Viewer displays log of subsystem events. Events are classified as:

• Runtime Events – A list of and information of up to about 300,000 of the most recent runtime events

recorded since the subsystem was started.

Event Severity Levels

Level Description

Fatal

Non-recoverable error or failure has occurred.

Critical

Action is needed now and the implications of the condition are serious.

Major

Action is needed now.

Minor

Action is needed but the condition is not a serious at this time.

Warning

User can decide whether or not action is required.

Information

Information only, no action is required.

135

Promise

Technology

Management with WebPAM PROe

Summary of Contents for Vess J3600

















































































































































































































































































































































Search results

Summary of Contents for Vess J3600

Reviews:

Related manuals for Vess J3600

Brands by name

Popular brands

Promise Technology Vess J3600, Product Manual

Search results

Summary of Contents for Vess J3600

Reviews:

Related manuals for Vess J3600

Brands by name

Popular brands