![background image](http://html.mh-extra.com/html/promise-technology/vess-j3600/vess-j3600_product-manual_1617255143.webp)
Making Maintenance Mode Settings
Each controller has its own IP addresses for access when the controller goes into maintenance mode.
To make
maintenance mode settings:
1.
Click the
Device
tab.
2.
Click the
Network Management
tab.
3.
Click the
Management Portal
tab.
4. For maintenance mode, use the
Static IP
settings.
5. Click the controller and protocol family whose settings you want to change and click the
Configuration
button.
6. Make the following settings are needed:
•
Check the
Enable
box
to enable this protocol family.
•
Check the
Enable DHCP
box to enable a DHCP server to make your
network settings. DHCP is currently supported in IPv4 only.
• For manual network settings, type the
IP address, subnet mask, gateway
IP address
, and
DNS server IP address
into the fields provided.
7.
Click the
Submit
button.
Making Maintenance Mode Port Settings
The IP settings of management ports are also configured in Network Management.
To make physical management port settings:
1.
Click the
Device
tab.
2.
Click the
Management Portal
icon.
3. Under
Static IP
, click on the gear icon and choose the
Modify
option.
4. In the new menu, make the following settings are needed:
•
Check the
Enable DHCP
box to enable a DHCP server to make
your network settings. DHCP is currently supported in IPv4 only.
Note that you will have the option to enable Auto DNS.
• For manual network settings, type the RAID subsystem’s IP address,
subnet mask and gateway IP address into the fields provided.
• You can choose to
Enable Physical IP
.
5.
Click the
Save
button.
123
Promise
Technology
Management with WebPAM PROe