Promise Technology Vess J3600 Product Manual Download Page 36

Page: 36 / 337

Placing the Vess system onto the rack rails

Rails installed and

tightened

Handles

Rail ends attach on the out

side of the front and rear rack

posts

Rail ends attach to the outside of each post

3. Place the Vess onto the rails.

•

At least two persons are required to safely lift the system.

•

Lift the Vess itself. Do not lift the system by its brackets.

Warning
Two persons are needed to safely place the

unit onto the rails.

DO NOT lift the unit by the handles

Promise

Technology

Vess R3600 / Vess J3600 Product Manual

Summary of Contents for Vess J3600

















































































































































































































































































































































Search results

Summary of Contents for Vess J3600

Reviews:

Related manuals for Vess J3600

Brands by name

Popular brands

Promise Technology Vess J3600, Product Manual

Search results

Summary of Contents for Vess J3600

Reviews:

Related manuals for Vess J3600

Brands by name

Popular brands