Promise Technology Vess J3600 Product Manual Download Page 115

Page: 115 / 337

Restarting the Subsystem

This function shuts down the subsystem and then restarts it.

To restart the subsystem:

Click the

Device

tab.

Click the

Overview

icon.

Click the

Shutdown/Restart Subsystem

button.

Choose the

Apply to

option,

Subsystem

Controller 1

Controller 2

Click the

Restart

button.

6. Type the word “confirm” in the field provided.

Click the

Confirm

button.

When the controller shuts down, your WebPAM PROe connection is lost.

8. Wait at least two minutes.

9. In your browser, click

Logout

in the WebPAM PROe Header, then log in again.

If you cannot log in immediately, wait 30 seconds and try again.

Promise

Technology

Management with WebPAM PROe

Summary of Contents for Vess J3600

















































































































































































































































































































































Search results

Summary of Contents for Vess J3600

Reviews:

Related manuals for Vess J3600

Brands by name

Popular brands

Promise Technology Vess J3600, Product Manual

Search results

Summary of Contents for Vess J3600

Reviews:

Related manuals for Vess J3600

Brands by name

Popular brands