![background image](http://html.mh-extra.com/html/promise-technology/vess-j3600/vess-j3600_product-manual_1617255141.webp)
Create IO Trunk
Two or more IO ports can be used to create a Trunk Port (link aggregation) in order to increase throughput
capacity. In order to do this, it is necessary to delete at least two IO portals in the
IO Portal
menu. Then the
physical ports can be aggregated to form a single portal. However, before creating the IO Trunk, it is necessary
to first delete all the portals on the IO ports that will make up the IO Trunk.
To delete IO Portals on ports to be used for the IO Trunk:
1.
Click the
Device
tab >
Network Management
>
Trunk.
2.
Click the
Add Trunk
button.
3. Click to select the ports to be used for the Trunk.
4.
Click to select the
Trunk Type
:
Balance XOR, LACP
or
Active-Standby
5. Choose the Controller where the Trunk is created and determine which port is Master Port.
6.
Click on the
Submit
button to create the new Trunk.
Add Trunk menu
121
Promise
Technology
Management with WebPAM PROe