![background image](http://html.mh-extra.com/html/promise-technology/vess-j3600/vess-j3600_product-manual_1617255104.webp)
ACL Setting
The Access Control List (ACL) rule-based access permission protocol is applied to a Share Disk when ACL
is enabled. To configure the rules for ACL, go to the
NAS Share List
menu, select the NAS Share you want to
configure, click on the
Gear
icon for that NAS Share, and select the
ACL
option. The ACL menu appears. You
will see the current ACL rule for the NAS Share. To clear the current settings, click on the
Clear
button to set the
ACL rules to default setting.
Access permission is listed after rules are added. To change the ACL configuration for the NAS share, click
on the
ACL Settings
button. The
Apply Onto:
pull-down menu is used to apply the rule to the entire NAS Share
(
This folder and its subfolders
) or to a selected folder in the NAS Share (
This folder only
). Click on
Save
to apply the new
configuration.
Note
Windows ACL must first be enabled in the SMB settings. For instructions, see
“Using Windows ACL” on page 86.
ACL Settings menu
84
Promise
Technology
Vess R3600 / Vess J3600 Product Manual