Chapter 4: Front Panel Interface
37
The first line of the Idle mode menu will display one of the following status
messages:
Array Functional
The array is fully operational, and no problems are
present.
Array Critical
The array is operational, but has lost its fault tolerance.
For RAID array levels 1, 0+1, 3, 5, 30, and 50 the array
contains a failed drive. The user should identify and
replace the failed drive.
Array Offline
The array is no longer operational. The array must be
rebuilt from the last tape backup or other device. For
RAID levels 1, 0+1, 3, 5, 30, and 50 at least two or
more drives in the array have failed. For a RAID 0
array, at least one drive has failed. The user should
identify and replace the failed drives.
No array is
defined
An array has not been defined. The user should define
an array for the UltraTrak to be functional.
The second line of the Idle mode menu can also provide the following error
information:
Fan Error
Fan speed is <2000RPM or >5500RPM
Array Rebuilding xx%
At least one array is rebuilding
Array Synchronizing xx%
At least one array is synchronizing
