Chapter 2: Getting Started
19
13. Press button to choose the
Add/Remove Drives
feature then press
SEL
.
14. Use the and button to select each drive. Press
SEL
to toggle between
adding or removing a drive. Press
EXIT
when done.
15. Press
SEL
to
Save Changes
16. Press
SEL
to create the array or press
EXIT
to cancel.
17. If you pressed
SEL
to create the array then you should see the message
“Array has been created.”
18. Switch the UltraTrak power off – wait 5 seconds and switch the power back
on.
You have successfully created an array manually. If haven’t already done so, you
need to select a SCSI ID before you can begin using the UltraTrak.