manualshive.com logo in svg

Promise Technology FAST TRAK S150, User Manual

Share
Download
Promise Technology FAST TRAK S150 User Manual Download Page 43

Chapter 4: Installing Software Drivers

35

Windows 2000

Install Driver During New OS Installation 

1.

Start the installation: Boot from the CD-ROM. Press F6 after the message 
“Press F6 if you need to install third party SCSI or RAID driver” appears. 

2.

When the Windows Setup window is generated, press S to specify an 
Additional Device(s) 

3.

Insert the Promise Technology driver diskette into drive A: and press Enter. 

4.

Choose 

Win2000 Promise FastTrak S150 SX4/SX4000 Series

 from the list 

that appears on screen, and then press the Enter. 

5.

The Windows Setup screen will appear again saying “Setup will load support 
for the following mass storage devices:” The list will include 

Win2000 

Promise FastTrak S150 SX4/SX4000 Series

. 

Note:

 If you need to specify any additional devices to be installed, do so at 

this time. Once all devices are specified, continue to the next step. 

6.

From the Windows Setup screen, press the Enter. Setup will now load all 
device files and then continue the Windows installation. 

Note:

 Check the readme file, included with the downloaded driver files, for 

instructions on installing the RAID Console.

Summary of Contents for FAST TRAK S150











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands