manualshive.com logo in svg

Promise Technology FAST TRAK S150, User Manual

Share
Download
Promise Technology FAST TRAK S150 User Manual Download Page 10

FastTrak SX4030, SX4060, S150 SX4-M User Manual

2

Product Overview

FastTrak SX4030 and SX4060 are ATA RAID controllers. The FastTrak S150 
SX4 is a Serial ATA RAID controller.  When used with Promise Array 
Management (PAM), the FastTrak RAID Controllers offer a feature-rich, secure 
and versatile enterprise-wide ATA RAID solution. In addition, the FastTrak 4060 
and S150 SX4-M support RAID expansion. The resulting RAID environment 
allows users and administrators to configure, manage, and monitor everything 
from single arrays on local systems to array networks residing in offsite locations. 

The FastTrak S150 SX4-M RAID Controller card supports Serial ATA hard drives. 
The FastTrak SX4030 and SX4060 RAID Controller cards support (Parallel) ATA 
hard drives. At their core, all three FastTrak cards provide advanced RAID 
management functions: creating arrays, monitoring them, keeping them online 
and operating at optimum efficiency. FastTrak can also perform many other 
tasks, such as: 

•

Create arrays at various RAID levels (0, 1, 0+1, 5 and JBOD), depending on 
the application being used 

•

Set up a network of FastTrak RAID servers (all running under different RAID 
levels) and monitor those servers from any workstation on the network 

•

Create a series of FastTrak RAID networks at any number of offsite locations 

•

Monitor and/or repair FastTrak RAID arrays using the Internet from an offsite 
location—all without compromising the integrity of secure servers 

XOR Acceleration 

The FastTrak S150 SX4-M, SX4030 and SX4060 Controllers have a Hardware 
XOR accelerator, which offloads the parity calculation workload from the main 
CPU and transfers it to the controller card, boosting the performance of the entire 
system. 

Hot-Swapping 

Each FastTrak S150 SX4-M can support up to four Serial ATA disk drives while 
each FastTrak SX4030 and SX4060 can support up to four (Parallel) ATA disk 
drives. With either Controller card the drives configured as RAID levels 1, 0+1, or 
5. Attached drives can be 

hot swapped

 when used with the optional Promise 

SuperSwap drive enclosures.

Summary of Contents for FAST TRAK S150











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands