19
Complete Operating Menu / Description
solenoid value 2
cond
period
min. time
D1C2-cond.-023-GB
Access to all setting menus can be blocked with an access code !
only with limit value relay, solenoid valve relay or servomotor
relay
setting ?
solenoid value 1
cond
period
min. time
10 s
1 s
10 s
1 s
➞
➞
control cond.
SV1 cond
solenoid valves
SV2 cond
➞➞
relay adjustment
relay1:
relay2:
SV1
SV2
Relay for power control
Possible values
Initial value
Increment
Lower value
Upper value
Remarks
Relay adjustment
as per
Motor
*At "limit value" the
identity code
Solenoid valve (SV1, SV2)
relays remain active
Limit value (Limit 1/2)
even with a fault.
Actuator 1,2
Servomotor
off
Cycle
10 s
1 s
10 s
9999 s
for solenoid valve
min. time
1 s
1 s
1 s
cycle/2
for solenoid valve
NOTE
The limit value relays can also be defined such that they react like an actuator. If e.g. a limit value
relay picked up, it will drop at a closed pause contact or for a subsequent delay time t
d
(if t
d
> 0 min
is set in “General settings”).
BA_DM_138_09_06_GB.p65
21.09.2006, 11:22 Uhr
19