71
promesstec GmbH
I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: [email protected] I Internet: www.promesstec.com
[44]
[45]
[46]
[47]
[48]
[49]
[50]
[51]
[52]
[53]
[54]
[55]
[56]
[57]
[58]
[59]
[60]
[61]
[62]
[63]
[64]
[65]
[66]
[67]
Load saved configuration into UMU 100
Save UMU 100 configuration in UMU-FD
Adjust LCD contrast
Adjust LCD backlight
Write a 6-character device TAG
Analog output value is shown in display line 3
Device TAG is shown in display line 3
Calibrate Input low to process value?
Calibrate Input high to process value?
Enable simulation mode?
Set the input simulation value
Relay simulation - use and
to toggle relay
1 and 2
Enable password protection?
Set new password
Enable Fastset functionality?
Relay setpoint - press to save
Relay setpoint
– Read only
Select language
Use process calibration values?
Set value for low calibration point
Set value for high calibration point
Select CJC-connector (accessory)
Select internal temperature sensor
Enable relay latch function?
Relay is latched
– press
to acknowledge
Relay 1 is latched
– press to release
Relay 2 is latched - press
to release
Relays are latched
– press or to release
relay 1 or 2
Release relay? (if conditions allow)
Enter setup menu? (latched relays may
release!)
