12
promesstec GmbH
I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: [email protected] I Internet: www.promesstec.com
6. Universal-measuring transducer UMU 100-A-B
• input for WTH, TE, Ohm, potentiometer, mA and V
• 2-wire supply > 16 V
• FM approval for installation in Div. 2
• Outputs for current and voltage
• Universal supply with AC or DC
Application
• Electronic, linear temperature measurement with resistance sensor or
thermocouple sensor.
• Conversion of linear resistance change into a standard analog current / voltage
signal, e.g. from solenoid valves, butterfly valves or linear movements with
connected potentiometers.
• Power supply and signal isolator for 2-wire measuring transducer.
• Process control with standard analog output.
• Galvanic isolation of analog signals and measurement of signals that are not
grounded.
• Suitable for use in systems up to Performance Level (PL) "d" according to ISO -
13849
Technical characteristics
• When the UMU 100 is used in combination with the programming front, all opera-
tional parameters of the corresponding application can be adjusted. The UMU
100 is equipped with electronic hardware switches and it is not necessary to
open the device to set DIP switches.
• A green / red LED in the front of the device indicates normal operation and
malfunctions.
• Constant checking of important memory data for security reasons.
• 2,3 kVAC galvanic isolation of the 3 ports.
