6
promesstec GmbH
I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: [email protected] I Internet: www.promesstec.com
Warning!
A dangerous situation may possibly occur, which can lead to burns
due to hot surfaces or liquids if they are not avoided.
Warning!
This device is designed for connection to hazardous electric
voltages. Ignoring this warning can result in severe personal injury or
mechanical damage. To avoid the risk of electric shock and fire, the
safety instructions of this manual must be observed and the
guidelines followed. The specifications must not be exceeded, and
the device must only be applied as described in the following. Prior to
the commissioning of the device, this manual must be examined
carefully. Only qualified personnel (technicans) should install this
device. If the equipment is used in manner not specified by the
manufacturer, the protection provieded by the equipment may be
impaired.
Warning!
No dangerous voltage may be connected to the device before its per-
manent installation has been completed, and the following measures
should only be carried out when the device is in a de-energized state
and under ESD-safe conditions:
Installation, assembly and disassembly of pipelines.
Troubleshooting the device.
Warning!
The front panel of the device must not be opened, as this may da-
mage the contacts for contacting the UMU-FD front display.
The device does not contain any internal DIP switches or program-
ming jumpers.
The UMU 100 must be mounted on a DIN rail according to DIN 60715.
