I.E. Environmental Requirements
Power Requirements:
100–240VAC, 50–60Hz, 2.1A
Temperature:
5–40°C
Humidity:
up to 80% relative humidity
The Maxwell
®
16 Instrument is intended for indoor use only. Wipe up spills immediately. Install the
instrument on a clean, level surface. To avoid shortening the expected lifespan of the instrument, install
in a location that meets the following criteria:
•
Locate on a sturdy, level surface.
•
Avoid dusty areas.
•
Choose a location that has good air circulation and is not exposed to direct sunlight.
•
Avoid noisy electrical power sources (e.g., power generators).
•
Do not install in a location where there is large temperature variability or high humidity.
•
Do not position the instrument so that it is difficult to unplug from the power source.
•
Do not place next to heat sources.
•
Do not use near flammable gases or liquids.
•
Do not place near other electrically sensitive instruments.
II.
Hardware Overview
Promega Corporation ·
2800 Woods Hollow Road
·
Madison, WI 53711-5399 USA
·
Toll Free in USA 800-356-9526
·
Phone 608-274-4330
·
Fax 608-277-2516
· www.promega.com
Part# TM274
Printed in USA.
Page 8
Revised 6/08
Maxwell
®
16 Instrument Front
Maxwell
®
16 Instrument Back
Door
handle
Display panel
and keypad
Label
Serial port. Connect to
computer using the RS-232
Cable to obtain firmware upgrades.
Power
connection
5174T
A
Power
switch
tm274.0608.qxp 6/4/2008 9:47 AM Page 8
