Promega Corporation ·
2800 Woods Hollow Road
·
Madison, WI 53711-5399 USA
·
Toll Free in USA 800-356-9526
·
Phone 608-274-4330
·
Fax 608-277-2516
· www.promega.com
Printed in USA.
Part# TM274
Revised 6/08
Page 11
5. Locate the top magnetic rod assembly
shipping anchors. There are a total of 4
anchors (A–D). Your view of shipping
anchor C may be obscured by the
magnetic rod assembly.
5185T
A
A
C
D
B
6. Use the 1.5mm Hex Wrench to loosen the
screw in the middle of shipping anchor (B).
Do not
completely unscrew the anchor from
the linear slide.
5186TB
7. Once the anchor is loose, slide the shipping
anchor (B) up to the top of the linear slide to
be even with anchors (A) and (D). If the
anchor comes off the slide, place it back on at
the top of the linear slide. Retighten shipping
anchor (B) at the top of the linear slide.
5187T
A
A
D
B
8. Slowly and gently raise the magnetic rod
assembly to better see shipping anchor (C).
9. Repeat Steps 6 and 7 for shipping anchor C.
Hint:
Hold the magnetic rod assemply up with
one hand, unscrew shipping anchor C and
reach your fingers behind the magnetic bar to
move the anchor up the slide. Then gently
push the magnetic bar down as far as it will go
and tighten anchor C at the top of the slide.
5188T
A
C
Shipping Anchor
tm274.0608.qxp 6/4/2008 9:49 AM Page 11
