PROLiNK Hurricane 9200/S, User Manual

Page: 63 / 205

Chapter 5 . Configuring WAN Interfaces
63
Field Description
Last Fail Cause Indicates the action that ended the previous PPP
session:
o
No Valid PADO Recvd: The device initiated a PPoE
handshake but did not receive a packet in reply from
the ISP.
o
No Valid PADS Recvd: After the initial handshake,
the device did not receive a confirmation packet
from the ISP.
o
Stopped by User: The user stopped the connection
(for example, by changing the Configuration
Manager settings for the PPP interface.)
o
No Activity: The PPP communication timed out, in
accordance with the timeout period specified on the
PPP Configuration page.
o
Auth Failure: The ISP could not authorize the
connection based on the user name and/or
password provided.
o
PADT Recvd: The ISP issued a special packet type
to terminate the PPP connection.
o
VC down: The Virtual Circuit between the device
and the ISP is down.
o
Internal failure: A system software failure occurred.
DNS
The IP address of the DNS server (located with your
ISP) used on this PPP connection.
SDNS The IP address of the secondary DNS server (located
with your ISP) used on this PPP connection.
Security
Protocol
The type of PPP security your ISP uses: PAP (Password
Authentication Protocol) or CHAP (Challenge
Handshake Authentication Protocol).
Login Name The name you use to log in to your ISP each time this
PPP connection is established.